Hump support

According to the application and different tower diameter, different supports can be used to support packing layer. Support construction needs to consider gas and liquid flow.
Especially between packing layer and support, the drainage capacity may be reduced. So the support must be suitable for packing type, packing layer height, fluid volume, possible weight increase due to pollution and the design temperature for specific application.
The support requires a support ring, and requires according to the diameter and/or support load one or several internal support beams. The high gas flow rate may cause pressure surge or water immersion, so the support can be fixed on the support ring.

Hump support

The hump with hump beam, relative to the cross section of the whole packing tower, has 100% free section. Down liquid and up air should be separated, so as to prevent the possibility of water immersion. Even with high hydraulic load, hump beam's height and hole width are the function parameters for specific application

Hump support Images